PV H1Z2Z2-K

Name: PV H1Z2Z2-K
SKU: h1z2z2-k

Halogen-free solar cable, 1.5 kV DC

1.5 kV DC CPR Eca EN 50618

CU/XLPE-HF/XLPE-HF On request Lead time: On request; the lead time is stated in the quote. Send your enquiry

Application

H1Z2Z2-K is the solar cable to EN 50618 for the DC side of a PV installation: tinned class 5 copper, halogen-free cross-linked rubber insulation and sheath, 1.5 kV DC, UV and weather resistant and rated for a 90 °C conductor temperature (120 °C for 20,000 hours). In red and black, for roofs, solar parks and floating installations.

Solar cable to EN 50618 and IEC 62930, suitable for both fixed and mobile solar installations (solar parks, rooftop systems and floating plants). The standard sizes from 2.5 to 25 mm² in black and red carry the TÜV Rheinland mark. Highly flexible, compatible with all common connectors and designed for connecting solar panels and PV strings.

Solar parksHalogen-freeTÜV

Also known as: solar cable · PV cable

Applications

DC cabling between panels, strings and inverter on roofs and in solar parks.
Floating solar plants and wet environments: suitable for damp and wet conditions.
Mobile and temporary PV arrays, with connectors of the common makes.

What to look out for

DC side only. After the inverter, continue with ordinary installation cable, such as YMvK Cca.
Red for positive, black for negative, so polarity stays correct when the installation is extended or parts are replaced.
Connectors of the same type and make on both sides, crimped with the matching tool. Mixed connectors cause contact resistance and heat.
UV resistant, but outdoors still run it in tray, conduit or under the panels, with no loose loops flapping in the wind.
Eca does not meet the Dca that the Bbl requires where the cable is in contact with indoor air in a building. There, choose the Cca version, available on request.

Construction

Conductor: Electrolytic annealed tinned copper, class 5 (flexible), IEC 60228 / EN 60228.
Insulation: Halogen-free cross-linked rubber according to table B1, annex B of EN 50618 and IEC 62930.
Outer sheath: Halogen-free, flexible cross-linked rubber sheath according to table B1, annex B of EN 50618 and IEC 62930. Colour red or black.

Electrical & thermal properties

Rated voltage Uo/U: 1.5/1.5 kV DC (max. 1.8 kV DC); 1.0/1.0 kV AC.
Test voltage: 6.5 kV AC.
Max. conductor temperature: 90 °C (120 °C for 20,000 hours).
Max. short-circuit temperature: 250 °C (max. 5 s).
Min. operating temperature: −40 °C (fixed and protected installations).
Suitable for: Wet, damp and humid environments.
Flame-retardant: EN 60332-1-2 / IEC 60332-1-2.
CPR classification: Eca acc. to EN 50575; Cca-s1b,d2,a1 on request.
Halogen content: Halogen-free according to EN 60754-1/-2; low smoke according to EN 61034-2.
Min. bending radius: 4 × outer diameter (d ≤ 8 mm); 5 × outer diameter (8 < d ≤ 12 mm); 6 × outer diameter (d > 12 mm).
Installation: In open air, in conduit, and in conduit in the ground.
Approvals: TÜV Rheinland (standard 2.5 to 25 mm² in black and red), RETIE, AENOR, RoHS and CE.

Dimensions and technical data

Sizes, weights and current rating

Cores × mm²	Outer Ø approx. (mm)	Weight approx. (kg/km)	Single cable free in air (A)	Single cable on a surface (A)	Two adjacent cables on a surface (A)	Voltage drop (V/A·km)
1×1.5	4.5	35	30	29	24	38.1
1×2.5	5.0	45	41	39	33	22.8
1×4	5.4	60	55	52	44	14.3
1×6	6.0	80	70	67	57	9.49
1×10	7.0	120	98	93	79	5.46
1×16	8.2	180	132	125	107	3.47
1×25	10.2	280	176	167	142	2.23
1×35	11.5	375	218	207	176	1.58
1×50	13.3	525	276	262	221	1.10
1×70	15.0	720	347	330	278	0.772
1×95	17.0	930	416	395	333	0.585
1×120	18.7	1175	488	464	390	0.457
1×150	21.0	1475	566	538	453	0.368
1×185	23.5	1805	644	612	515	0.301
1×240	26.3	2345	775	736	620	0.228

Current ratings to EN 50618, table A.3, at an ambient temperature of 60 °C, for a DC circuit. Voltage drop at a conductor temperature of 120 °C.

The complete dimension and current-rating tables are in the datasheet.

Which one do I choose?

H1Z2Z2-K or PV1-F?

PV H1Z2Z2-K

EN 50618

PV1-F

TÜV specification 2 PfG 1169

PV1-F is the older designation from the German TÜV specification 2 PfG 1169, which has been superseded by the European standard EN 50618. H1Z2Z2-K is the solar cable to EN 50618, rated 1.5 kV DC. For new installations, therefore, choose H1Z2Z2-K.

3D view, representative version.

Datasheet (PDF) ↗

Category: Installation cables
Rated voltage: 1.5 kV DC
CPR class: Eca
Standard: EN 50618
Availability: On request
Lead time: On request; the lead time is stated in the quote.

Need it fast? We are experienced in rush deliveries, even straight from production.

Request PV H1Z2Z2-K

Include cross-section, length and required delivery date, and we can get straight to work.

1Which cable?

Cable type Know the type? Then this field is enough; the specification below is not needed.

Type unknown? Fill in the specification (optional)

Voltage class Conductor Number of cores Cross-section (mm²) Insulation material Sheath material CPR class Installation

2How much and when?

Length in metres * Required delivery date Notes

3Your details

Name * Company Email * Phone

A fast response on working days, often the same working day. No account and no webshop: one email is enough.

Have a cable list (Excel, CSV or PDF)? Email it to info@qcables.nl and we will include it in the quote.

By sending your enquiry you agree to our privacy policy. We use your details only to handle your enquiry.

PV H1Z2Z2-K

Applications

What to look out for

H1Z2Z2-K or PV1-F?

YMvK Cca

H07V-R

H07Z1-K